Reactor

Current-Limiting Reactor

Intended for limitation of short-circuit currents in electrical networks with frequency of 50 and 60 Hz...

Shunt Reactor

A shunt reactor is an absorber of reactive power, thus increasing the energy efficiency of the system. It is the most compact device commonly used for reactive power compensation in long high-voltage transmission lines and in cable systems. The shunt reactor can be directly connected to the power line or to a tertiary winding of a three-...

Series Reactor

Series reactors are mostly used to limit the current and to increase the impedance. They are designed for different purposes, such as current limiting, neutral / earthing, motor starting, arc furnace series reactors, and duplex reactors....

Arc-Suppression Coil

The Arc-Suppression Coil creates a neutral point for a network. ZN connection is usually applied. Z connection provides linear and specified zero sequence impedance. YN+d can also be applied....

Smoothing Reactor

DRY-TYPE AIR CORE SMOOTHING REACTOR IS NORMALLY USED FOR REDUCING THE HARMONIC COMPOMENT OF VOLTAGE AND CURRENT IN THE DC SYSTEM, AND LIMTING THE RAPAID RISE SPEED OF FAULT CURRENT UNDER THE FAULT CONDITION, AND LIMITED THE CURRENT VALUE OF SHORT-CIRCUIT. IT IS USUALLY USED FOR THE HIGH VOLTAGE DC SYSTEM AND LARGE RECTIYING AND FEEDER SYS...

Wave Trap

...

Capacitor

Series Capacitor

High voltage capacitor is mainly used in the AC Power System with 50/60Hz to improve power factor....

Shunt Capacitor

Shunt capacitor banks are primarily used to improve the power factor in the network. They also improve the voltage stability and reduce network losses. Improving the power factor also means a higher power transmission capability and increased control of the power flow. ...